Honda S2000 Jewel Headlights V1

Honda S2000 Jewel Headlights V1

$1,800.00

-

Demon Eyes

Etched Lenses

led strip

Subtotal:

Add-ons total:

Total:

Category:

Description

Custom Built to order. Build time is 4-10 weeks!

 

  • Brand new Headlights included
  • plug and play

 

Options

Demon Eyes

Demon Eyes is the Ability to make the jewels change colors. it issei’s controlled using your smart phone and downloading an app. you can select any single color or over 200 different patterns.

etched Lenses 

Led Strip

Led strip will be mounted on jewel projector shroud. Adding this options will require some wiring involved. you will have to tap into your turn signal wire as well as your parking light wire.

Sequential Led Strip

Strips: Profile Prism (RGB) LED Strips | The Retrofit Source LED101

Color Flow Led Strip 

 

Disclaimer

Jewel Eye Condensation

Due to how much of the rear housing has to be cut out to fit jewel eye projectors the original seal of the headlights is compromised. We use adhesive silicone to seal up  the rear housing after cutting it out to make clearance for the jewel projector. We have been doing this method for a very long time and have had good results. If your headlights are fogging internally, this is simply the sealant not being completely cured (dry) yet. Avoid any rain for at least 2 weeks with exposure to heat outside, and any signs of fogging inside should be gone by then. Jewel Eye headlights require heavy modification to the rear housing and may develop condensation under heavy rainfall or to a high humidity outside environment. This is unavoidable and we will not accept any warranty repairs for these issues.

Jewel Eye Adjustment

Some of our Jewel Eye headlights retain factory adjustment. Use the factory adjustment sprocket on the rear of the headlight to raise or lower the lights. Jewel Eye headlights have very tight fitment tolerances in the housings they are retrofitted in, adjustment range will be limited when compared to the stock housings. Do not overspin the adjustments, you will strip out the threads or drop the entire assembly entirely. The lights will have to be repaired at your cost.

If you have a static-fit type build, shimming the headlights may be required to obtain proper beam height level, it may take some tinkering to get where you want. Using washers, the headlight can be angled up or down to compensate for any alignment issues. Cutting larger holes on the mounting points of the plastic headlight housing itself can also help to get the lights lined up. On models that we offer that are of static-fitment, it is specifically stated on the product page that the headlights will require fitting/modification for proper beam level, there should be no

Jewel Eye Cosmetics

We use used oem Acura jewel projectors for all the jewel retrofits. Some cosmetic blemishes and/or signs of use are to be expected on the jewel eyes. We try our best to pick out the best possible projectors possible since brand new ones are out of the question because brand new oem lights are about $2000 a piece. 

 

Reviews

There are no reviews yet.

Be the first to review “Honda S2000 Jewel Headlights V1”

Your email address will not be published. Required fields are marked *

Facebook
Instagram